Rmcgrath53 wrote:
I new enough to set the system up and am trying to expand to the comp connect, I have an Ethernet cable going from my laptop to the controller I am hooked to the internet wirelessly from a internet card that can connect a couple computers. I load up msview and search for devices and an error pops up about cant connect to 192.168.1.237
Thanks
The software is LOOKING for the controller, not through the internet but as a LOCAL IP address (IE LAN or local area network), via the wired NIC.
the 192 address is a default address given to the device by the manufacturer. Your device will become connectable once you have a crossover cable..
