DIY MC-4 Connectors- 2nd Photo Added
I suppose everyone knows about these except me until today, but in case anybody does not, here it is. There is a Male and Female version, so you need one of each to join your wires to the panel ...
Forum Discussion
Wire Nuts and tape?
for shame bfl....for shame
;)
My portable panels I am using 45 amp anderson powerpoles, as I use these everywhere else. Have to destrand 8AWG to 10awg thickness and shave the insulation square to get them to fit the housings.
I've started my engine through a pair of these in parallel.
I've kept all the MC4's I've cut off leaving a pigtail, will use them when I need a weatherproof, less temporary connection.
for shame bfl....for shame
;)
My portable panels I am using 45 amp anderson powerpoles, as I use these everywhere else. Have to destrand 8AWG to 10awg thickness and shave the insulation square to get them to fit the housings.
I've started my engine through a pair of these in parallel.
I've kept all the MC4's I've cut off leaving a pigtail, will use them when I need a weatherproof, less temporary connection.
