Drilling P.C. Boards (tips solicited)
I am presently using small perforated breadboards that occasionally need the perforations enlarged for leads of larger devices such as diodes and resistors. Do I really need carbide drills and an e...
Forum Discussion
Pref board...enlarging holes..
When I did this I just used a hand Chuck to hold the tiny drill bit
A few turns with my fingers and it was done
More holes or duplicate project boards, I used a small hobby manual crank hand drill, common for builders before the dremel became so popular
When I did this I just used a hand Chuck to hold the tiny drill bit
A few turns with my fingers and it was done
More holes or duplicate project boards, I used a small hobby manual crank hand drill, common for builders before the dremel became so popular
