Dripping glue in toilet
Just picked up our new TT today. Good timing too because the weather's suddenly turned nice. :) The 3" ABS pipe inside the toilet, before it enters the holding tank, has glue hanging down from it...
Forum Discussion
Before and after photos. Lots of glue hanging down from the entire perimeter of the pipe. I had to pull the toilet out to get access. I was able to sand the bottom of the pipe so now "stuff" has a nice smooth entry into the tank. I would have liked to get the glue off the bottom of the tank but couldn't and not worth getting a hand stuck in there.
When we had the same thing happen our last TT, we had serious ongoing trouble getting the tank to empty because of a similar glue issue. We could only get the tank emptied maybe 50% at best. Didn't matter how much we backflushed, used the tank rinser or anything else we could think of including getting the tank pumped out. The tank would be full again in less than a day and backing up into the toilet.
Not going to happen this time. :)
When we had the same thing happen our last TT, we had serious ongoing trouble getting the tank to empty because of a similar glue issue. We could only get the tank emptied maybe 50% at best. Didn't matter how much we backflushed, used the tank rinser or anything else we could think of including getting the tank pumped out. The tank would be full again in less than a day and backing up into the toilet.
Not going to happen this time. :)
