Duo Therm roof A/C
Both my roof AC unit quit working. I have line voltage to the AC units. I have a Duo Therm digital Thermostat, but it looks like its not getting power(no info on the stat). I replaced the stat , bu...
Forum Discussion
cdl2 wrote:
Yes....its the CCC2, & I did the reset, but didn't find zone 2.
I didn't do anything with the DIP switches.
Called Dometic......not much from them.
I didn't do anything with the DIP switches
THAT IS YOUR PROBLEM. Dometic is NOT in the business to tell lay people how to install and troubleshoot. You MUST tell the Zone 2 module board it IS zone 2 by turning the DIP switch ON. You then must turn ON each applicable DIP switch (heat Strip/Furnace) and so on for that Zone. The Zone 1 is Zone 1 by default, but you have to turn on each DIP switch for whatever else is on the tstat(furnace/heat strip and any other). Doug
