Electrical Wire Identification
Hi all, Trying to help my dad identify some wiring in his coach for a project. Manufacturer hasn't been any help so I thought I'd try here. He has two wires that we are trying to identify the w...
Forum Discussion
OP here, to make a short story long...
Dad's coach is a 07 or 08 Fleetwood Bounder Diesel.
He recently had the 12v JC Refrigeration compressor unit installed and has had several problems with it. I've been helping him troubleshoot the problems.
The latest problem could possibly be a result of excessive voltage drop in the 12v supply to the JC unit. The JC unit is supplied with a connector that plugs directly into the 12v supply wires to the original Norcold unit after the Norcold is unplugged. They also state that the 12v supply wires should be minimum 10 gage. I have doubts that the original factory wiring to the Norcold was 10 gage, thus the question about the markings.
Dad's coach is a 07 or 08 Fleetwood Bounder Diesel.
He recently had the 12v JC Refrigeration compressor unit installed and has had several problems with it. I've been helping him troubleshoot the problems.
The latest problem could possibly be a result of excessive voltage drop in the 12v supply to the JC unit. The JC unit is supplied with a connector that plugs directly into the 12v supply wires to the original Norcold unit after the Norcold is unplugged. They also state that the 12v supply wires should be minimum 10 gage. I have doubts that the original factory wiring to the Norcold was 10 gage, thus the question about the markings.
