Fisher & Paykel dishwasher solutions
Recently had a problem with dishwasher failure to pump water on wash or rinse cycle. After many calls and attempts for support from manufacturer I was able to diagnose and solve the problem, and want to share experience with others.
The flood control sensor was activated by a small amount of water beneath the drawer and when I took advice of someone to dry it with a hair dryer the washer worked again for one cycle but water again collected in the corner where sensor is located . It appeared that the unit was not level and the water was collecting around the sensor after only a short time.
Solution was to re-level the motorhome . The leveling eliminated the accumulation of water around sensor and stopped leakage altogether! Dishwasher is working fine now for over a week and I am no longer doing the dishes!
The flood control sensor was activated by a small amount of water beneath the drawer and when I took advice of someone to dry it with a hair dryer the washer worked again for one cycle but water again collected in the corner where sensor is located . It appeared that the unit was not level and the water was collecting around the sensor after only a short time.
Solution was to re-level the motorhome . The leveling eliminated the accumulation of water around sensor and stopped leakage altogether! Dishwasher is working fine now for over a week and I am no longer doing the dishes!
