Furnace troubles
Hello there, my first post... so I have an old 5th wheel trailer I have been fixing up, a '84 alpenlite 28'. So, I tried to get my furnace running, first of all it was missing a ignitor/flame sensor-s...
Forum Discussion
Loud popping is from an accumulation of unburnt gas
Ignitor Gap needs to be 1/8" and centered over burner slots
Flame sensing rod gap is 3/8" and needs to be engulfed in main flame when it lights off
1980s Hydro Flame manual
Pg 34
Ignitor Gap needs to be 1/8" and centered over burner slots
Flame sensing rod gap is 3/8" and needs to be engulfed in main flame when it lights off
1980s Hydro Flame manual
Pg 34
