Gen/inverter issue
I installed a manual Reliance transfer switch in our trailer. Purpose is to draw power from shore out the rear or from gen up front where gen is. All has worked well. Lately I installed a 1000 watt...
Forum Discussion
YOu said that you reset the breaker on the inverter and all was well after that.
So clearly you had something that tripped the breaker. Now was it a standard "Too much current" breaker or was it a combo GFCI/Current (or a straight up GFCI)?
I'd guess something inside was not quite shut off but in trouble shooting you shut it off LIkely the converter
So clearly you had something that tripped the breaker. Now was it a standard "Too much current" breaker or was it a combo GFCI/Current (or a straight up GFCI)?
I'd guess something inside was not quite shut off but in trouble shooting you shut it off LIkely the converter
