gennie not providing power to coach

MEXICOWANDERER wrote:
That's why the prefix

"IF you decide to change the relay"

Understood. I was very happy that wasn't necessary.

That's why the prefix

"IF you decide to change the relay"

Thanks for the update!

Good news that you got it fixed! Also good news that Xantrex now has technical support after apparently going without for a while back when.

MEXICOWANDERER wrote:
Photos label tags and more photos...

If you decide to replace the transfer relay inside. Remove the inverter from the vehicle. Do the work on a bench with a comfortable seat. Super bright illumination and get a set of reading glasses that focus 4" in front of your nose.

I cannot remember which brand of inverter had Torx security screws T10 on the inverter shell.

The ID printed on the relay is tiny. This is where reading glasses are mandatory. Take several images of the relay in place before proceeding. It does not allow for oops.

It's not a difficult operation if you remain patient and organized.

I called Xantrex technical support and the pleasant gentlemen explained where to find the fuse associated with the circuit controlling the bypass relay. I was able to access it without removing the inverter from the coach, and sure 'nuff the fuse was blown. I replaced it and everything works normally. All this for a little 1/4-amp, buck-and-a-quarter fuse.

Thanks to all who contributed advice.

Jim

MEXICOWANDERER wrote:
Photos label tags and more photos...

If you decide to replace the transfer relay inside. Remove the inverter from the vehicle. Do the work on a bench with a comfortable seat. Super bright illumination and get a set of reading glasses that focus 4" in front of your nose.

I cannot remember which brand of inverter had Torx security screws T10 on the inverter shell.

The ID printed on the relay is tiny. This is where reading glasses are mandatory. Take several images of the relay in place before proceeding. It does not allow for oops.

It's not a difficult operation if you remain patient and organized.

Thanks for the tips.

Jim

enblethen wrote:
Look closely on the unit. There could be a small white or red reset button
Manual

Thanks, Bud. There is a white button on the front, which looks like a circuit breaker but could be called a reset button I guess. Whatever it is, it is in and cannot be reset. And thanks for the link to the manual, but I already have the manual and it does not show where the transfer switch or fuse are.

Jim

Photos label tags and more photos...

If you decide to replace the transfer relay inside. Remove the inverter from the vehicle. Do the work on a bench with a comfortable seat. Super bright illumination and get a set of reading glasses that focus 4" in front of your nose.

I cannot remember which brand of inverter had Torx security screws T10 on the inverter shell.

The ID printed on the relay is tiny. This is where reading glasses are mandatory. Take several images of the relay in place before proceeding. It does not allow for oops.

It's not a difficult operation if you remain patient and organized.

Look closely on the unit. There could be a small white or red reset button
Manual

Generator and shore power not providing power to coach - UPDATE

UPDATE: Following the advice of several I have checked the transfer switch and it appears to be working.

However, I now suspect the internal transfer switch in the inverter. I have determined that while on shore power or genset both A/Cs work, indicating both legs are powered. But I narrowed down what is and isn’t powered when on shore power, and it turns out the only items powered are those that are NOT powered when on inverter power. Everything powered by the inverter (e.g., microwave and those outlets powered by the inverter) is unpowered. Without shore or genset power, everything is receiving power from the inverter that is designed to be powered by it.

If you agree the problem is probably that internal transfer switch, how can I get to it to service/replace it? I have the owners manual but that doesn’t help, and I can’t find a service manual online. I understand a small (1/4-amp?) fuse may be the culprit, but I have no idea where it is located nor how to get to it. (Hint: it is not behind the convenient little connection panel on the front.)

My inverter is a Xantrex Heart Freedom 458 1500 watt.

Thanks for your help.


Jim
2002 Monaco Knight 30PBD