Getting all the water out of the water heater
When you drain your water heater, and get ready to winterize your rig, do you remove ALL the water out of the water heater? There is usually about 1/2 gal or so left in it. There will not be any damag...
Forum Discussion
To get the last little bit of water out of the bottom of the water heater, I remove the anode(Suburban water heater), flush the inside with a wand, roll up a very thin towel or napkin so that it is small enough to fit through the anode hole and back into the bottom of the water heater and let it sit there with the rest of the towel or napkin hanging down and over the outside edge. Through capillary action, by the next day or so, most if not all of the water on the bottom of the heater has been removed. If there is any water left at all,it'll dry quickly.
