Ground-Neutral Bond clarification needed.
I need a quick clarification on using a Ground-Neutral Bonded (GNB) plug on a Yamaha 3000ISEB (or any inverter type really). Not sure I am understanding something. When making the GNB plug, does t...
Forum Discussion
Try this again.
I should have mentioned, I was doing this to get my PI EMS-HW50C to work with my generator. Now I have to push the bypass.
PI said to make the GNB plug, but they didn't say whether it needs to be on the generator end of the wire running from the generator to the trailer. Or does it need to just be plugged into an available receptacle on the generator, making all the other receptacles also bonded.
Can anyone clarify this?
I should have mentioned, I was doing this to get my PI EMS-HW50C to work with my generator. Now I have to push the bypass.
PI said to make the GNB plug, but they didn't say whether it needs to be on the generator end of the wire running from the generator to the trailer. Or does it need to just be plugged into an available receptacle on the generator, making all the other receptacles also bonded.
Can anyone clarify this?
