Having trouble repairing shwintec slide
I purchased from the Lippert factory the new side rails and repair kit for our four year old slide. The directions were clear and I had no problems replacing the parts. I did find some installation is...
Forum Discussion
I have a 35 foot test harness. I connect the harness to the control board and then to the suspected motor. IF the system operates, it is the harness. IF the system malfunctions still, it is the motor. Some Schwintek harness are actually 2 harness's. A short 7 foot harness from the motor down the slide fascia and then it connects to the harness from the control board. Both have the potential to be pinched and shorted. Doug
