Honda 2000I versus Cpe 2000 inverter
I just weigh a Honda with full gas tank 53.2# Also weigh my cpe 2000 with full gas tank 55.6# I cannot tell the difference by lifting them For practical purposes they are the same heigh...
Forum Discussion
Mr Wiz can you review the Honda figures?
The V and A figures don't seem to match for loading. EG, when using my old Honda 3000, it was 126.8V unloaded, but with loads I got:
122.7/15.57 with the 100 amper at 102a
123.8/13.64 with the 75 amper at 75
124.7/11.06 with the 55 amper at 56.8
125.4/8.4 with the VEC 40 amper at 40.4
So you see a consistent rise in loaded voltage with less load. The Honda 2000 figures posted seem to jump around.
I got 0.73PF with the 75 amper and 0.97 with the PF corrected 100 amper. The VEC 40 was 0.64 I don't have PFs for when at lower amps.
The V and A figures don't seem to match for loading. EG, when using my old Honda 3000, it was 126.8V unloaded, but with loads I got:
122.7/15.57 with the 100 amper at 102a
123.8/13.64 with the 75 amper at 75
124.7/11.06 with the 55 amper at 56.8
125.4/8.4 with the VEC 40 amper at 40.4
So you see a consistent rise in loaded voltage with less load. The Honda 2000 figures posted seem to jump around.
I got 0.73PF with the 75 amper and 0.97 with the PF corrected 100 amper. The VEC 40 was 0.64 I don't have PFs for when at lower amps.
