House Battery Disconnect Not Working
I have a 2008 Itasca Impulse 31C. The house battery disconnect stopped working a few years ago. I replaced the switch and it still didn't work. I'm now getting some free time on my hands and wantin...
Forum Discussion
That means the switch or wiring is issue.
Remove the switch from the wall to gain access to terminals.
The both sets of end pins should have 12-volts DC. Switch should have opposite corners of switch jumper to reverse voltage polarity.
The center two pins should have 12-volts DC when switch is pushed.
see page five for basic wiring.manual
I didn't know Aloha still existed! Raised in Beaverton!
Remove the switch from the wall to gain access to terminals.
The both sets of end pins should have 12-volts DC. Switch should have opposite corners of switch jumper to reverse voltage polarity.
The center two pins should have 12-volts DC when switch is pushed.
see page five for basic wiring.manual
I didn't know Aloha still existed! Raised in Beaverton!
