How many batteries?
How many batteries are needed to insure that a Progressive Dynamics PD4655V (55 amp using 4g wires) will go into boost mode when the batteries are at 50% SOC?
Forum Discussion
I just researched the threads from 2011 that I started to get the information to do the install. In one of the threads I stated that I had 15 feet of positive and 9 feet of negative (which went to the frame).
I am just trying to reassure myself that it is hitting the 14.4v it is capable of if the batteries are low.
wa8yxm wrote:
To be honest, The PD 91/9200 series does not really do bulk (Boost) that much take a look at the voltage out on both boost/bulk and absorption It is VOLTAGE that generates the "Pressure" that pushes the charge into the battery. Think about this, and you will stop worrying.
I am just trying to reassure myself that it is hitting the 14.4v it is capable of if the batteries are low.
