Intellitec EMS display flashes on and off
The green EMS display flashes off and on every few seconds. There is nothing wrong with load mgmnt and it does what it's suppose to do but I can't figure out why it's flashing...nothing on line tells...
Forum Discussion
Here's what I've done so far:
Tightened all electrical connections behind main panel (none loose)
Turned off electric from pedestal and disconnected batteries for 15 minutes
Called both Winnebago support and Intellitec support (no luck)
Removed my Progressive surge unit from pedestal
I'm now waiting to see if the monitor panel still flashes. If it doesn't, I'll know something is amiss with the surge protector. I'll keep you posted. No one has heard of this problem.
Tightened all electrical connections behind main panel (none loose)
Turned off electric from pedestal and disconnected batteries for 15 minutes
Called both Winnebago support and Intellitec support (no luck)
Removed my Progressive surge unit from pedestal
I'm now waiting to see if the monitor panel still flashes. If it doesn't, I'll know something is amiss with the surge protector. I'll keep you posted. No one has heard of this problem.
