Inverter wiring setup
Hello all. I am new but have read many posts on this subject already and wanted to post my setup idea here to see if it sounds right. My rig is a small Fleetwood Prowler 717B hybrid travel trailer...
Forum Discussion
Hi lafester,
My male and female plugs for "patching" live in the shore power cord box. The inverter lives beside the battery bank just behind the drivers seat.
Here is a simple flow chart:
external power source-->male plug-->inverter-->female plug-->shore power cord
If I need to "patch" around the inverter the flow chart becomes:
external power source-->male plug-->female plug-->shore power cord
The way mine is set up I can also do:
external power source-->shore power cord.
I hope this helps.
My male and female plugs for "patching" live in the shore power cord box. The inverter lives beside the battery bank just behind the drivers seat.
Here is a simple flow chart:
external power source-->male plug-->inverter-->female plug-->shore power cord
If I need to "patch" around the inverter the flow chart becomes:
external power source-->male plug-->female plug-->shore power cord
The way mine is set up I can also do:
external power source-->shore power cord.
I hope this helps.
lafester wrote:
Not quite understanding all the plug and outlet solutions. I'm not going to have any plugs or outlets near the inverter. I could make some I suppose but I don't see how that is easier then one switch.
