issues syncing controller
hi, am a newbie so looking for guidance. My setup: lifeline 8dl 255ah battery, 3-100w renolgy eclipse panels, 40amp commander controller. I also have between batterys a blue sea charging relay...
Forum Discussion
BFL13,, instructions say to::
#1-
- "DISCONNECT DC POWER. Disconnect the battery POS (+) wire at the battery end before connecting this Converter/Charger to any
vehicle/device wiring".
Does this actually mean every time you want to charge the battery with this unit the positive cables connected to the battery needs to be disconnected?
#4--ELECTRICAL REQUIREMENTS. A 120 VAC receptacle needs to be located within 36 inches of the Converter/Charger to supply power.
#2 doesnt work for me, can I just run a 12' extension cord to the unit while it is in the van next to the battery?
thanks
#1-
- "DISCONNECT DC POWER. Disconnect the battery POS (+) wire at the battery end before connecting this Converter/Charger to any
vehicle/device wiring".
Does this actually mean every time you want to charge the battery with this unit the positive cables connected to the battery needs to be disconnected?
#4--ELECTRICAL REQUIREMENTS. A 120 VAC receptacle needs to be located within 36 inches of the Converter/Charger to supply power.
#2 doesnt work for me, can I just run a 12' extension cord to the unit while it is in the van next to the battery?
thanks
