issues syncing controller
hi, am a newbie so looking for guidance. My setup: lifeline 8dl 255ah battery, 3-100w renolgy eclipse panels, 40amp commander controller. I also have between batterys a blue sea charging relay...
Forum Discussion
I get more confused as I go on. When I started this post my house battery was down around the mid 12s somewhere. During this blog I put on my 4amp charger that I have had forever and the charge went to the mid upper 14 range and the input dropped down into the 1/2amp range on the charger. Pulled the charger off and plugged in my mili amp tender.
All seems good...The battery slowly over the days dropped down to 13.6 where it has stayed all week, which seems good to me(but Im a newbie) what do I know.
So after I was checking on buying the charger you recommended just for the heck of it I went out and plugged in the 4amp charger I have and within 1 minute the warning light on my "Renogy MT50" gauge came on and started flashing overcharge.
Any ideas?
Thanks for answering those last two questions.
All seems good...The battery slowly over the days dropped down to 13.6 where it has stayed all week, which seems good to me(but Im a newbie) what do I know.
So after I was checking on buying the charger you recommended just for the heck of it I went out and plugged in the 4amp charger I have and within 1 minute the warning light on my "Renogy MT50" gauge came on and started flashing overcharge.
Any ideas?
Thanks for answering those last two questions.
