KwiKee Again need - UPDATE STEP FIXED
1995 double step old receipt says control unit PN-90956000 replaced june 2006 model number on control unit is PN-90956000 need PN of replacement control unit that will work have searched th...
Forum Discussion
MR Wizard
Too bad you are not closer
I've repaired a few of the controller boards over the years
Repair cost of about $30 compared to a new board makes good sense to me
Things change if they are epoxy encapsulated
Too bad you are not closer
I've repaired a few of the controller boards over the years
Repair cost of about $30 compared to a new board makes good sense to me
Things change if they are epoxy encapsulated
