KwiKee Again need - UPDATE STEP FIXED
1995 double step old receipt says control unit PN-90956000 replaced june 2006 model number on control unit is PN-90956000 need PN of replacement control unit that will work have searched th...
Forum Discussion
bad news is my controller is potted
Good news
i tracked the problem to a broken wire for the door sensor 'reed switch'
drilled a new hole in the step well and ran new wires
if the circuit fails/breaks
the step won't extend...if its extended it retracts and will not extend
retracted is the 'fail safe' mode for a bad door sensor circuit
thank you for the advice and the kind offers
Good news
i tracked the problem to a broken wire for the door sensor 'reed switch'
drilled a new hole in the step well and ran new wires
if the circuit fails/breaks
the step won't extend...if its extended it retracts and will not extend
retracted is the 'fail safe' mode for a bad door sensor circuit
thank you for the advice and the kind offers
