Leaking Bottle
I have a radiator coolant surge bottle which is made of some type plastic. There is a brass fitting which screws into the top with a small tube connected to it with a clamp. The brass fitting has a ...
Forum Discussion
Encore wrote:I would use goop or Shoe Goo same stuff just clean the threads as described in the post before applying,it will adhered well.
Thanks Gjac. I don't have an obvious crack in the tank.
My concern is whether I may have over tightened the brass fitting which created a small seepage around the threads. My question is whether the Goop or JB Weld will seal this seepage.
