LED Dimmer
I wanted to stabilize my LED lighting circuit voltage using a buck/boost converter. When the LED's are dimmed you can see alot of fluctuation from battery voltage change like when the water pump cycle...
Forum Discussion
GordonThree wrote:MY 9v LED arrays are built for 9v. These are flat panels that I stripped all the electronics off and drive them from the new regulator and dimmer. I suspect (unless you can rewire them?) your 12v arrays won't do well @9v.
How well do the LED perform at 9 volts? A straight buck converter would be easier to find than a boost-buck, forward or sepic converter.
Are you dimming all the leds in the rig, or just a strip of them, or a single fixture?
