LED flicker part deux
Had a long going post about my new LED fixture with ripples when on gen or shore power. Worked fine on 12v. Got new PD 4645 in and installed today. Light works fine now. Any body need a 10000 uF c...
Forum Discussion
Don't know if this was mentioned before. I did LED conversion about three years ago so we had LOTS of hours on them. LED's typically do not fail like regular bulbs. Most likely they will start to flicker - but only in small segments - typically three leds. It is not necessary to replace them until the flicker is bad enough to bother you. I usually moved a failing one to a seldom used spot - like porch light until I got around to ordering more. Early failures usually attributed to poor/cheep design. Most are OK and have long life at 12V but some just won't last long at 14V.
