So, if you don't have enough charger/generator to get the batts to instant Vabs, can you apply this idea when there is a time while the battery rises to Vabs and then starts the absorption stage? I think I missed that info exactly.
So if I am doing my 50-90 and it gets to 75% when the battery reaches 14.8, I should lift the caps and start looking at bubbles. If it is only bubbling hardly any, I can keep going at 14.8 till it is bubbling "lightly" and then drop the voltage. So now I am at maybe 80% SOC, then do the 80-90 at the lower voltage? (but same amps into the battery so no time is lost?)
Or is it too late because it will already be bubbling "lightly" when it finally gets to 14.8?