Need direction. ATWOOD heater not staying lit
I turn on furnace at the stat... The furnace fan starts.. then the igniter clicks.. the propane lights. There is flame and heat then after 2 seconds once the ingnighter stops the flame stops but th...
Forum Discussion
The "flame proving" and the logic board aren't agreeing that it's actually lit. Dirty/Loose contacts on the edge connector to the logic board is a known problem. At least on the water heaters, not sure about the furnace. Clean board edge with pencil eraser and re-tension the connector contacts with a dental pick.
Site bryantrv.com has service manuals. Should be able to find one for your Atwood model.
Also, post your Atwood model here, you might get more detailed help.
Site bryantrv.com has service manuals. Should be able to find one for your Atwood model.
Also, post your Atwood model here, you might get more detailed help.
