Forum Discussion
17 Replies
- MEXICOWANDERERExplorerRunning forty amps through this breaker would be like putting 2-ply tires on your trailer. Those studs are # 10 X 32
Use a surface mount manual reset breaker. For a truck charge lead line, with 10 gauge wire it is silly to think of anything rate more than 30-amperes. You do NOT want a auto-reset breaker on the truck side. A short will eventually drain the truck battery to 00.00 volts, and is a constant liability whether the trailer is connected or not. I do NOT like auto reset breakers in a position where they can Dracula a battery or bank right into the grave. - MegaJohnExplorer
wildwest450 wrote:
nbounder wrote:
Painting your tongue . . .will that be latex or oil base?
Rust-Oleum Professional enamel spray paint.
Painting your tongue? Say "aaahhhhh....."
Glad folks were able to help you identify the part.
Happy Camping!
John. - wildwest450Explorer
nbounder wrote:
Painting your tongue . . .will that be latex or oil base?
Rust-Oleum Professional enamel spray paint. - nbounderExplorerPainting your tongue . . .will that be latex or oil base?
- wildwest450Explorer
Cuffs054 wrote:
I may be missing something here, but wouldn't finding out what caused it to fire be a good idea?
It didn't. I'm going to paint my tongue and it's all rusted up so I just want to replace it. - wildwest450ExplorerOk, I guess i'll go with 40, I found an identical one at grainger and they only go up to 40, thanks for the help!!
- Cuffs054ExplorerI may be missing something here, but wouldn't finding out what caused it to fire be a good idea?
- YC_1Nomad
- With #8 then a 40 or 50 is fine.
- wildwest450Explorer
USAFBILL wrote:
Something missing here...you can't run one end to the positive lead of the battery and the other lead to chassis ground....
Sorry, by "camper frame", I meant it goes to the camper wiring system, it's definitely not a ground.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,393 PostsLatest Activity: Jun 11, 2026
