Need to replace my water pump
My water pump has started leaking. It was made in 08/1990, so it's probably time. The original pump was a Shurflow 2088-403-144. This is a 3-chamber pump that shuts off at 45 PSI and does 2.8 GPM...
Forum Discussion
This is why it's not accessible. :)
http://imgur.com/a/scpOY
Even when I disconnect the heater hose there is just no room to get in their and even if I undid the clamps securing them to the floor the water pipes to under the floor/carpet and there is no service loop to pull up the plumbing to get at those valves.
Steve
http://imgur.com/a/scpOY
Even when I disconnect the heater hose there is just no room to get in their and even if I undid the clamps securing them to the floor the water pipes to under the floor/carpet and there is no service loop to pull up the plumbing to get at those valves.
Steve
