norcold 1200 dead panel
My 1200 less than 1 yr old no panel light, thus no codes. 13.6 to the board. both fuses okay. No red light on the recall part. Any ideas for tonight.
Forum Discussion
Once again my not thinking raised it's ugly head. When I found 12v at the board I assumed that could not be the problem. I then found some hallway lights not working. When checking the 12v fuses behind the cover lo and behold there was a 20a that tested good with an ohmmeter but was not passing voltage or at least very little, not visually burned. A new one cured all problems. And most likely a $100 service call. Thanks Doxie for the reply. Marv
