Norcold 9162 Not Working on AC
First -- the refrigerator is working perfectly on LP and is as cold as you would want it. When first turned on, it goes to auto mode then immediately to LP. If I press and hold the mode button, th...
Forum Discussion
YES.....
There is a 5A glass fuse that could be blown on control module for electric heater circuit and then there is the electric element that could be bad
IF fuse is good........
Unplug element leads from board and plug then directly into 120V AC source.
If it gets hot and cools fridge down then circuit board
If it doesn't.........element
Probably element. That is what flashing on panel is indicating
There is a 5A glass fuse that could be blown on control module for electric heater circuit and then there is the electric element that could be bad
IF fuse is good........
Unplug element leads from board and plug then directly into 120V AC source.
If it gets hot and cools fridge down then circuit board
If it doesn't.........element
Probably element. That is what flashing on panel is indicating
