Onan Micro quiet 2800 help
Have a 2011 Pleasureway Excel TS. Onan gas 2800 genset. 150 hours. I run it every month. Ran fine last month. Now will run when I hold in start switch, dies immediately when I release start Switc...
Forum Discussion
Chuck,
Many generator have a safety by-pass in the start circuit. For splash lube aircooled units, this is usually an oil level and an over heat sensor. If you have a wiring diagram in the book or can download one, check those two out. If the oil level sensor is a float in the fill plug / level check, check that first. I have seen more than a few of those break a wire and the symptoms were exactly as you report.
Matt
Many generator have a safety by-pass in the start circuit. For splash lube aircooled units, this is usually an oil level and an over heat sensor. If you have a wiring diagram in the book or can download one, check those two out. If the oil level sensor is a float in the fill plug / level check, check that first. I have seen more than a few of those break a wire and the symptoms were exactly as you report.
Matt
