Paralleling Power Supply Units Made Easy ???
I am considering paralleling a couple of 20a variable adjustable psu's for 40a charging. According to what I have read on the world wide inter-web, it can be done quite easily, provided the following ...
Forum Discussion
"Or, mess with the innards and get an automatic alternative to rubbing two sticks together."
Thanks! I'll try to remember that if I'm ever stranded and in need of making a fire! :)
As for #2 taking over, I think with the set-up I described, both psu's share the load until amps taper to at or below the 20a setting, so well into the 40a charge; not when reaching the preset volt setting. Perhaps it has to do with the psu's being c.v., c.c., and current limiting?
Thanks! I'll try to remember that if I'm ever stranded and in need of making a fire! :)
As for #2 taking over, I think with the set-up I described, both psu's share the load until amps taper to at or below the 20a setting, so well into the 40a charge; not when reaching the preset volt setting. Perhaps it has to do with the psu's being c.v., c.c., and current limiting?
