Pleated Blind Peg
We have pleated blinds in our Sunseeker. The bottom peg has pulled out from the wall, leaving a hole too large to just re screw the peg. What is the best way to repair this. I was thinking maybe fi...
Forum Discussion
I have used JB Weld for similar projects, with great results. It's a two part epoxy paste. A little goes a long way. Fill the hole, let it dry, and drill a new hole for the screw.
Pro tip number one: since JB Weld can be sticky and messy, put masking tape around the area to be filled.
Tip number two -- wear disposable gloves. JB Weld is hard to remove from your skin.
Please don't ask how I learned these tips.
Pro tip number one: since JB Weld can be sticky and messy, put masking tape around the area to be filled.
Tip number two -- wear disposable gloves. JB Weld is hard to remove from your skin.
Please don't ask how I learned these tips.
