hydraulic slide problem
This should be easy for most of you. I have a TT with 2 slides, when I press the butten to put them in it works fine, but, when I try to put the slides out it just makes a click sound and nothing move...
Forum Discussion
Ok, I'll try
My FW has a relay that determines the direction that the hyd. motor turns. Since your pump only turns one way, your problem is in the wiring to the large relay on the switch that operates the relay. The relays are common, and can be found on Amazon. They are also used for 12 volt winches with the 4X4 groups.
This is how my slides work, yours maybe different if the hyd pump does double duty for say leveling jacks
Jim
My FW has a relay that determines the direction that the hyd. motor turns. Since your pump only turns one way, your problem is in the wiring to the large relay on the switch that operates the relay. The relays are common, and can be found on Amazon. They are also used for 12 volt winches with the 4X4 groups.
This is how my slides work, yours maybe different if the hyd pump does double duty for say leveling jacks
Jim
