Reading AMPS from a solar panel
I have a 12v - 120W solar panel on my TC. This is controlled by a Morningstar Sunsaver 20 into a single group 27 wet cell battery. I have a Trimetric 2025RV battery monitor installed. As far as ...
Forum Discussion
Yes, you will be reading the output of the controller, not the panels. When I played with it with a charged battery, I was getting something like 14.4v and 1.2a via the controller, but closer to 15v and 2.5a if I connected the panel directly to the battery, with no controller. The controller was doing its job.
