Repair Battery Posts? UPDATE-Photos
Update at end (5 Sep post) I have over torqued the threaded bolts on a couple of posts so they have come out loose. The bolts are simply set upside down with the head covered in the lead of the pos...
Forum Discussion
Here is the post on a 6v GC2 XHD with the bolt still in but the covering lead worn off so the bolt is loose.
Here is the bolt out, showing the star- shaped head so it won't twist when the nut is being worked
Here is the crimp clamp on with wire attached--repair complete! :)
Here is the bolt out, showing the star- shaped head so it won't twist when the nut is being worked
Here is the crimp clamp on with wire attached--repair complete! :)
