Replacing Switches (Caution! Nerdy)
Not satisfied with being hip-deep in projects I am looking into replacing the lamp and water-pump switches in Quicksilver with membrane touch switches. They glow orange with about 1.5 ma current, and ...
Forum Discussion
Well I am definitely going to purchase those flip-flop switches that Gordon Three so kindly posted. Eight of them as a matter of fact. By virtue of them being tucked in the ceiling they will store at a higher temp than shade ambient and hopefully lessen corrosion and oxidation.
I have those two streetlamps soaking in acetone at the moment. 300 pesos/gallon = $15.31 US.
And tonight I retrofit yet another Megawatt with caliper dial 10-turn pot, and all the upgrades. Going web surfing for a 100 ma scale 4" Simpson ammeter. Going to put that Manganin shunt to work. Wish I had a 12" x 5" X 5" box to stuff it in.
I have those two streetlamps soaking in acetone at the moment. 300 pesos/gallon = $15.31 US.
And tonight I retrofit yet another Megawatt with caliper dial 10-turn pot, and all the upgrades. Going web surfing for a 100 ma scale 4" Simpson ammeter. Going to put that Manganin shunt to work. Wish I had a 12" x 5" X 5" box to stuff it in.
