Replacing Xantrex Prosine 2,0 Recommendations
The third Prosine 2.0 inverterd/charger has died. Very little room near batteries. SEE PIC since then in electric bay below the charger is the SC 2030 solar controler and shunt for the Trimetric...
Forum Discussion
Same as last time. Put the transfer switches up on the shelf where the PS is and get a 90 amp IOTA and 2000 watt GoPower inverter to mount in the lower area. Looks like tons of room once the junk on the floor is relocated. Although I might mount the inverter on the side wall.
