SAFE WIRE GUAGE ?
Bought a pure sine wave power inverter to run a 20 inch box fan. Works fine. I added three 12 volt DC outlets running off nearby light fixtures. Then I wondered if the wire for the light is thick e...
Forum Discussion
Hi
If it is OEM wiring it will already be fused.
But you may waste lots of amps by pushing the circuit too hard.
Better to keep the inverter as close as possible to the battery bank and use the largest size wire you can on the DC side, properly fused.
If it is OEM wiring it will already be fused.
But you may waste lots of amps by pushing the circuit too hard.
Better to keep the inverter as close as possible to the battery bank and use the largest size wire you can on the DC side, properly fused.
