Setting up trimeric to work with solar panels
OK, so just finished my panel install. Was reading how the trimetric will automatically reset the SOC to 100% at night when really it might not be at 100. So I Googled it after doing a search on here...
Forum Discussion
I have mine set to manual reset, and haven't had any issues or complaints. In fact with lots of sun, and not much power useage, and my solar controller set to to do an equalizing occasionally, the trimetric has on occasion shown >100% SOC. like 103%. Basically due to the fact that on recharge there is an assumed efficiency for the battery, which will effect the SOC readout vs. the actual SOC.
