Setting up trimeric to work with solar panels
OK, so just finished my panel install. Was reading how the trimetric will automatically reset the SOC to 100% at night when really it might not be at 100. So I Googled it after doing a search on here...
Forum Discussion
It will take some time to develop trust in the Tri and your solar charging system on just what is 100% SOC. Breaking-in new batts, follow-on of aged batts, temp's, equalizing and a few other things can change what 100% displayed was a few days/weeks/months ago. The only true confirmation is a temp adjusted hydrometer after the batt is idle for a few hours.
Yes, I use L3 all the time due to the options mentioned in the OP'ed article.
Yes, I use L3 all the time due to the options mentioned in the OP'ed article.
