Slide out will not retract
Our slide out will extend every time we go but it will not retract. It starts to retract maybe an inch and then stops. It is a mechanical slide out. We have a 30 ft. Terry Dakota with a 12 ft slide....
Forum Discussion
Check the voltage at the motor while the incoming load is activated.
If its holding 11-12 volts, then the problem is in the mechanical slide system.
If lacking voltage, try hot wiring 12 volts directly to the motor, eliminating all switches etc.
If its holding 11-12 volts, then the problem is in the mechanical slide system.
If lacking voltage, try hot wiring 12 volts directly to the motor, eliminating all switches etc.
