firemedic1992 wrote:
My 2003 Topaz behaves the same, slide goes out on 12 volt (new batteries) but will only come in with generator or 120v plugged in. I've lubed the slide mechanism but still the same. I guess a new motor is next.
If that motor is not overheating, I'd doubt a new motor will fix that.
I would more suspect too much resistance somewhere, in connections, or switches. If its done this since new, either the motor is barely adequate to do the job, or the wiring is too small to handle the load.
To eliminate the latter, connect jumper cables from a full charged battery directly to the motor.