trailrider wrote:
ScottG wrote:
I didn't think the breakers were in series. Looks like 1 feed wire supplying both from the middle. Then a wire comes out of each end & goes to slide (Breakers are not polarity conscious). I would never try to deploy more than one slide at a time so the circuit looks fine to me.
No, as I said in the original post the left side wire is incoming from batteries. So power to the small slide goes in series through both breakers.
That would actually be a parallel circuit.
Series would be if one slide were powered by both breakers connected end to end.
Cheers,
Scott