ScottG wrote:
trailrider wrote:
ScottG wrote:
I didn't think the breakers were in series. Looks like 1 feed wire supplying both from the middle. Then a wire comes out of each end & goes to slide (Breakers are not polarity conscious). I would never try to deploy more than one slide at a time so the circuit looks fine to me.
No, as I said in the original post the left side wire is incoming from batteries. So power to the small slide goes in series through both breakers.
That would actually be a parallel circuit.
Series would be if one slide were powered by both breakers connected end to end.
Cheers,
Scott
Power comes in on the left wire and goes out the farthest wire to the right to the small slide. So power goes through both breakers to the small slide. Series in my mind.