Forum Discussion
dougrainer
Jul 10, 2018Nomad
1. You CANNOT use an IR thermometer on Refers and AC's. You will not get an accurate read
2. The ONLY way to check is a small glass of water after 24 hours with a digital thermometer
3. IN a Slide room, you need an extra fan blowing out the upper door to get the hot air completely out
4. Also, the area at the back by that door. It needs room to flow the air out. Since you changed models, the rear ventilation may not be to spec and needs modified to fit your 1350.
5. From the upper door outside you will be able to look down and see the fans. Doug
2. The ONLY way to check is a small glass of water after 24 hours with a digital thermometer
3. IN a Slide room, you need an extra fan blowing out the upper door to get the hot air completely out
4. Also, the area at the back by that door. It needs room to flow the air out. Since you changed models, the rear ventilation may not be to spec and needs modified to fit your 1350.
5. From the upper door outside you will be able to look down and see the fans. Doug
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,210 PostsLatest Activity: Mar 02, 2025