Small Anderson Power Pole Connectors 1, Mex 0
I am fighting the insertion of assembled connector conductor into plastic base, and I shouldn't have to. I am using a standard peg imprint uninsulated terminal (T&B) crimper. After assembly the termin...
Forum Discussion
The 10 ga wire I used was stiff (but stranded) building wire of some type. It just did not crimp well. I didn't have any better wire at the time for this little pigtail.
So I'm blaming the wire. Couldn't have been me.
:)
So I'm blaming the wire. Couldn't have been me.
:)
