ktmrfs wrote:
westend wrote:
Trackrig wrote:
Found a nice YouTube on the Brat.
Bill
Looks like a good product. The presenter looks like she came in contact with some electricity, lol.
Also, bad info presented about relationship of panel voltage to voltage of battery bank. Anyone, as long as the controller is rated high enough, can use a 36V module with a 12 V battery bank. With PMW, you'll be leaving some amps on the table but their corollary doesn't follow.
true, but a 36-40V, a typical 24V panel with PWM and 12 v bank is going to give you about 1/2 the current a 18V-20, the typical 12V panel will give you. so I'd call that more than some amps.
I guess it was the way it was said, like only a 12V panel will work with the controller.
