Splendide 2100 dryer not heating
We have a Splendide model WD2100 vented washer/dryer combo. Serial #: 40212 3210 91280180101 All of a sudden, the heating portion of the dryer mode stopped working. The fan motor is working p...
Forum Discussion
I called Westland Sales and they said I needed a new board as the relay had failed. New board $364. So, I pulled the board from the unit and then thought if the relay was bad that I might be able to replace just the relay. After pulling the board I found a burnt spot on the bottom of the board where the relay is soldered in. I cleaned up the area and re-soldered the connection and all is well.
I have been running the unit for a couple of hours now with no overheating of the area on the board. Must have been a bad solder joint that got worse over the years due to all the road vibration.
I want to thank all of you for all of your input. Hopefully I can help out in the future.
I have been running the unit for a couple of hours now with no overheating of the area on the board. Must have been a bad solder joint that got worse over the years due to all the road vibration.
I want to thank all of you for all of your input. Hopefully I can help out in the future.
